How Do I Unbox My Canon Pixma Pro 200 Setup

Canon PIXMA PRO 200 Setup is a Wireless Professional Dye-Based Photo Inkjet printer that uses the Full-Photolithography Inkjet Nozzle Engineering method for printing. It is one of the best photo printers that offer Panorama size printing.

This photo inkjet printer is ideal for professionals who are looking for a photo printer that can deliver high-quality and long-lasting photo printouts. Some cool features that make the Canon PIXMA PRO-200 printer unique from other photo printers are listed below:

33 Supported Languages
8 inks and 768 nozzles (total: 6,144)
Canon Professional Print & Layout Software
Dye Based Ink Technology
Energy Star Certified
Genuine Canon Media Compatibility

Top Feed and Manual Feed Slot
Standard Interfaces: Hi-Speed USB, Ethernet, Wireless, and Wireless PictBridge
Supports Windows, Mac, iOS, Windows 10, and Android operating systems
Print resolution for color up to 4800 x 2400 dpi, etc.

Setting up this Canon PIXMA printer is pretty easy. In the remaining sections of this article, we will show you how to perform the Canon PIXMA PRO-200 unboxing and setup for the first time.

Unboxing & Setting Up- Canon Pixma Pro-200 Complete Guide

The Canon PIXMA PRO-200 unboxing and setup process includes four simple steps.

Unpacking the product
Configuring the initial settings

Completing the hardware setup
Installing the printer on a device

Now, let’s see the entire setup process in detail.

Unpacking The Product

Initially, unpack your Canon printer to prepare it for the setup. If you have already unpacked your printer, skip to the “configuring the initial settings” section on this page.

Open the top cover of your printer box.
At the top of the box, you can find
Ink tanks for setup
Print Head
Multi-purpose Tray
Power Cord
Setup CD-ROM
Safety and Important Information
Getting Started Guide

Remove the above components from the box.
Now, take the Canon PIXMA printer out of the product box.
Remove the Styrofoam pieces from the printer and place the machine on a neat surface where you can use the machine comfortably.
Now, gently peel off all the packing tapes, cardboard pieces, and other unwanted materials from the printer.
Place your unpacked Canon printer closer to an electrical outlet.
Recycle the packing materials properly.

Configuring The Initial Settings

The second step of the Canon PIXMA PRO-200 unboxing and setup is turning on the printer and configuring the initial settings.

Plug one end (small part) of the power cord to your printer’s inlet and the other end to the electrical outlet.
Now, single-press the ON button on your printer to turn it on.

If you’re turning on your Canon printer for the first time, it might take a few seconds or minutes to complete the initial boot-up process.
So, wait patiently for the boot-up process to complete.
Once it is done, the Language selection screen will open.
Choose the device language of your desire using the arrow buttons.

Press OK > Yes to confirm the selection.

Now, the “Start print setup.” message will be displayed on the screen.
Press OK to begin the setup.

Configure the initial settings by following the prompts displayed on the screen.

Completing The Hardware Setup

Install the print head followed by the ink tanks on your printer. After doing that, load the recommended paper into the paper support and complete the alignment process.

Open the paper output tray of your printer followed by the top cover of your Canon printer.
Now, raise the print head lock lever.
Unpack the print head and install it into its slot.
Before installing the head, ensure that the protective cap from it is removed.
Lock the print head lever.
Now, remove the ink tanks from their package.
Gently take off the orange cap from the tanks.
Now, install all the tanks into their slots.
Ensure that the tanks are installed correctly in their slots.
Close the top cover.

Now, the following screen will open.
Wait for the printer to complete the ongoing process.
Press the OK button when the printer screen shows “Start alignment….”
Now, gently open the paper support, followed by the feed slot cover on your printer.
Move the paper guide to the right.
Now, load the recommended paper type with its print side facing up.
Adjust the guide properly and close the slot cover.
Ensure that the output tray extension and its support are opened.
Complete the alignment process by following the prompts displayed on the screen.

Connecting The Printer To A Device

Choose the connection method to connect your printer to the computer or smartphone.

Once the alignment process is done, the “Select the connection method” screen will open.

Choose the connection method of your preferences from the list and follow the on-screen instructions to connect your printer to the smartphone or computer using it.

Finally, print a test page to check whether the Canon PIXMA PRO-200 unboxing & setup process is done correctly.

If the Canon printer prints the test page successfully, the setup is done correctly.

Otherwise, re-perform the setup.

Contact our technical experts if you need real-time assistance in unboxing and Canon Pixma Pro 200 Setup.